JVC HR-S5200U - Timer-Recording with VCR Plus+; Basic VCR Plus+ Programming; Daily and Weekly Timer Recording; Timer Settings and Disengagement

EQ Timer-Recording with VCR Plus+
Your video recorder is equipped with the VCR Plus+ programming system. This programming system greatly simplifies timer
programming because you won't have to enter all the data that is usually necessary (such as date, start and stop time, and channel).
Simply key-in the PlusCode number for the TV program you wish to record (in most TV listings) and the VCR's timer is
programmed. (For On-Screen Timer Programming without VCR Plus+ «> p.30.)
VCR Plus+ progrenunand is‘not possible unless you have already....
set the VCR's clock
set the VCR's tuner
made necessary changes in the Guide Channel Set screen.
EN-28
1 Insert a cassette with the safety tab present.
® The VCR power will come on automatically.
@ If watching on channel 3 or 4 be sure that the VIDEO
indicator is lit. If the indicator is not lit press TV/VIDEO
so that it lights.
Press MENU.
@ The "VCR PLUS+" input
screen will be displayed.
3 Press the Digit keys to enter
* the PlusCode number. for VCR nee
the TV program you wish to
record, 236g
To make corrections, press PRESS (ol
CANCEL and re-input with Teas Terrase bare
Digit keys.
ESO AR he
Press SELECT.
"i The settings for the PlusCode
é number you just entered will
be displayed.
m-If the settings are incorrect
and do not match the program’ | PRESS {GeDAILY, SaEERLY
PRESS (MENU) TO SO END
you wish to record, press
CANCEL and, after
pressing MENU three times, te-input the PlusCode.
Se
Bi ahs
5 Press SP/EP.
(Continued on next page.)
WEEKLY
6,7
Press MENU.
™ Select the desired Auto Timer setting. See page 32 for
details.
7 Press MENU again.
Brees "TIMER.
@ The VCR will enter the timer mode and power will go off.
For AUTO TIMER and other timer programming features, ir p. 32,
For other error indications, (> p, 39,
To Timer-Record Daily Serials
This function lets you set the recorder to'timer-record at the same
time every day, Monday through Friday.
™ After pressing SELECT in step 4, press DAILY (Digit key 8).
"DAILY" will'appear.
To Timer-Record Weekly Serials
This:function lets you set the recorder to timer-record at the same
time on the same day every week. —.
™ After pressing SELECT in step 4, press WEEKLY (Digit bay
9), "WEEKLY" will appear.
TO MAKE CHANGES IN THE
SETTINGS
You can delay a program's stop time or make other such
“revisions" in the settings.
"ERROR" WARNING
If the PlusCode you input is
incorrect, "ERROR" may appear on
the screen to advise you of the
error. This. happens when the code
is for a program which has already
passed. "ERROR" is displayed for
about 4 seconds and returns to the
VCR PLUS+
23698
= EAR
PRESS (DIGI
THEN PRE: Blan
PRESS (MENU) TO EN
input screen (step 2).
[1] After step 5, press SELECT. PROGRAM
Ry Press SELECT to move'to the | pare 12/25 MON
setting you wish to change, so se Wee
that it blinks. CHANNEL,” ROBP
[3] Press SET to make the change. PRESS (SELECT, SET +/-)
[4] Return to step 6. PRESS (MENU) 10 END
TO DISENGAGE THE TIMER
For éafety, wher: AUTO TIMER is "OFF", your VCR ‘disables aw]
other functions while in the timer mode.
™ To use your VCR, first disengage the timer mode by pressing
TIMER again. Now all functions will be operable.
tie @ To re-engage the timer, press TIMER. |
NOTE:
If theré is a power failure the: VCR will remember your timer-record
selections for 60 minutes.
EN-29