JVC HR-S5200U - Timer and Special Features; Auto Timer Function; Timer Program Management; Multi-Brand Remote Control Setup

a
Timer-Recording
(cont'd)
EN-32
SELECT
Auto Timer
What:this
feature
does:
Usually,
the
timer
mode
is
not
engaged
unless
the
TIMER
button
is
pressed.
But
with
AUTO
TIMER
set
to
ON,
the-timer
mode
is
automatically
engaged
when
the
VCR's
power
is
turned
off,
and
is
disengaged
whenever
VCR
power is turned on again.
After step 6 (& p. 29) or step
12 (@ p: 31), press SET to
choose "ON"; and press MENU:
Or...
(1)
Press
MENU,
SET,
and
PRESS
(fiay
toeno
SELECT
as
many
times
as
necessary
to
access
the
AUTO
TIMER
screen:
(c@
p.
7)
[2] Press SET to choose "ON".
[3]
Press
MENU
as
many
times
as
necessary
to
exit.
To
check
and
cancel
programs
Make
sure
the
timer
mode
ts
disengaged
first.
Then...
(0)
Press
MENU
and
then
press
SELECT
{to
access
the
Program
Set
screen).
[2]
Press
SET
to
check
through
the
programs
in
succession.
To cancel the program...
[8] Press CANCEL.
™ Repeat steps 2 and 3 as necessary.
[4]
‘Press
MENU
as
many
times
as
necessary
to
exit.
Sil
Special
Features
The
provided
remote
control
is
capable
of
controlling
10
different
TV
brands
including
JVC
and
13
different
Cable
Box
brands.
Follow
the
instructions
below
to
set
the
appropriate
code
for
your
TV
or
Cable
Box.
Digit keys
TV/CABLE/
VCR switch
CH. +/-
TV Brand Name And Code
TV BRAND NAME
JVC
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
SONY
TOSHIBA
ZENITH
HITACHI
BRAND CODE
Cable Box Brand Name And-Code
CABLE:
BOX:BRAND
NAME
BRAND
CODE
Gi
01,02,03,04,05,06,07,08
JERROLD
01,02,03,04,05,06,07,08
SCIENTIFIC:ATLANTA
095310"
7
.
ZENITH.
14,12:
:
PIONEER
1914
ee
HAMLIN
45,16,17,18
REGAL
15;16,17,18:
OAK
19;20,21
SIGMA
19,20,21
TOCOM 22,23
RCA 24,25,26
PANASONIC
24,25,26
SPRUCER.
24,25,26.
TV Multi-Brand Remote Control
If your TV is aJVC, you don't have to set the TV code.
PREPARATION
[i] Turn the TV's power OFF using the TV's remote control.
[2]. Set the remote control's TV/CABLE/VCR switch to "FV".
[3]. While holding down the POWER button, enter your TV's
brand‘code-with the Digit Keys then press STOP.
Brand setting is completed. Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
If you'set the wrong code, re-enter the right code,
{4], Press POWER to tum the TV power on and check to see if
he, the remote control works with the TV.
OPERATION i
) 7] Set the remote control's TV/CABLE/VCR switch to "TV".
[2] Operate the TV.
@ POWER, TV/VIDEO, CH +/-, VOL. +/- buttons and Digit
keys are available.
[3] To operate VCR, set the TV/CABLE/VCR switch to "VCR". 4
L
Cable Box Multi-Brand Remote Control
ho we
Some Cable Box brands have more than one code. When your
Cable Box does not function with a specified code, try other codes.
PREPARATION
[1 Turn the Cable Box power OFF using the Cable Box's remote
control.
[2] Set the remote control's TV/CABLE/VCR switch to "CABLE".
{3} While Holding down the POWER button, enter your Cable
Box's brand code with the Digit Keys then press STOP.
m= Brand setting is completed. Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
Wt If you set the wrong code, re-enter the right code.
(4) Press POWER to turn the Cable Box's power on and check to
see if the remote control works, with the Cable Box.
OPERATION
(0 Set the remote control's TV/CABLE/VCR switch to "CABLE".
[2] Operate the Cable Box.
m POWER, CH +/-, ENTER buttons and Digit keys are
available.
[3]
To
operate
VCR,
set
the
TV/CABLE/VCR
switch
to
"VCR".
NOTES:
l It is necessary to set the cable box brand in your remote control (this
page) and the Cable Box Controller (7p. 16) individually.
With the remote-control, you can change channels and turn on/off
your cable box from a distance.
With
the
Cable
Box
Controller,
your
cable
box’s
channels
can
be
automatically changed during timer-recording.
=
Cable
box
brands
available
for
the
remote
control
(listed
on
the
left)
differ
from
those
that
are
available
for
the
Cable
Box
Controller
(c>p.
16).
B
It
is
possible
that
the
remote
control
will
not
operate
your
cable
box
even
if
the
cable
box’s
channels
automatically
change
during
timer-
recording
using
the
Cable
Box
Controller.
EN-33