JVC HR-S5200U - Editing Operations; Editing with Another VCR; Editing from a Camcorder; Audio Dubbing

@ Editing
Recorder Your VCR
35] Rear AUDIO IN
tS VIDEO IN
or
AUDIO OUT. VIDEO OUT
Player © _ Another VCR
Assemble editing adds one recorded scene to another in
succession. To use'your VCR as the recording deck...
{@] Load the source tape in the player, and'the recording tape in
your VCR.
7] Select the recording speed (SP or EP).
(8) Put your VCR ‘in the Record-Pause mode.
[9] Play back the source tape to’search for'a scene to be edited.
{i} Press the recordet's PLAY button where you want to start
editing.
ft] Press the recorder's PAUSE button to stop editing.
(2) Repeat steps 9 through 11 to continue editing.
(Assemble Editing is also possible using your VCR as the |
playback deck.)
To edit to or from another VCR
Your VCR can be used as either the recording deck or the source
player when editing tapes.
PREPARATION
(0) Connect the player's VIDEO OUT and AUDIO OUT
connectors to the recorder's VIDEO IN and AUDIO IN
connectors.
@ If the player has an S VIDEO connector, connect it to the
recorders S VIDEO connector using the provided S-Video
cable.
™ When using your VCR as a recorder and connecting it to a
monaural deck, connect that deck's AUDIO OUT connector
to your VCR's AUDIO IN L connector.
OPERATION
fs]
Press MENU, SET, and
SELECT as many times as
necessary to access the "TAPE
DUB MODE" screen. (¥ p. 7)
3] Press SET to choose "ON".
{4] Press MENU as many times as PRESS (SET 4/-) FOR CHOICE
necessary to exit. PRESS (MEN) 10 END
[3] Set the recorder's input mode to
AUX,
™@ With this VCR model, press the digit key "0". "AU" will
appear instead of a channe] number.
FOR INSERT EDITING
Insert editing replaces part of the recorded scene with new
material. Both the picture and Hi-Fi audio soundtrack are
teplaced with new ones, while the normal audio soundtrack
remains unchanged. Use your VCR as the recording deck.
[6] Load the source tape in the player, and the recording tape in
your VCR,
[7] Play back the recording tape and engage the Still mode at the
edit-in point (the beginning of the segment to be replaced).
(@] Press INSERT.
®@ Your VCR enters the Insert-Pause mode. (REC, PLAY and
PAUSE light up on the FDP.)
‘The TV screen changes from the still picture to the input
signal you are going to record.
Play back the segment of the source tape to be inserted.
Press PLAY on the recorder.
w'Insert editing will start. (PLAY and REC are displayed on
the FDP.)
ale
[Advantages-Of S-VHS VCRs
~You can edit from VHS to S-VHS; from S-VHS to VHS, or from
S-VHS to S-VHS.
@-From VHS to S-VHS (VIDEO-VIDEO connection): Record
VHS playback signals in the S-VHS mode. Although the
picture quality is inherently limited by that of the original, the
edited tape has better picture quality than those made by VHS-
to-VHS editing,
® From S-VHS to VHS (VIDEO-VIDEO connection): Because
the picture quality of the source material is very high, the
edited tape has better picture quality than those made by VHS-
to-VHS editing.
@ From S-VHS to S-VHS (S-VIDEO connection): All signals
B
Press PAUSE on the recorder to stop insert editing.
™ Do not press STOP to stop insert editing, otherwise the
picture will be distorted at the switching point between the
newly inserted and previously recorded pictures.
FOR AV INSERT EDITING
If you want to replace the picture, Hi-Fi audio soundtrack and
normal audio soundtrack all at the same time...
_Instep 8 above, after you press INSERT, press A. DUB. also.
(REC and PLAY blink and PAUSE lights up on the FDP.)
will be transferred without degradation.
EN-34
Recorder Your VCR
To the rear panel,
VIDEO f . & PAUSE/SPECIAL
IN “To BIN: 4g FUNCTION connector
Mini-plug Cable (provided)
(JVC camcorder only)
AUDIO OUT
NOTES:
@ After audio dubbing, the normal audio track remains selected. To
hear the Hi-Fi tracks, select "Hi-Fi" <> p.20.
® Audio dubbing is possible using the rear connectors.
® Audio dubbing will stop automatically at the counter reading of
"0:00:00", and the recorder will enter the Play mode. Check the
counter before starting audio dubbing.
@ It may be unlawful to record or play back. copyrighted m material
without the consent of. the copyright: ‘owner.
To edit from a camcorder
" Tapé-te -tape editing is also possible using a camcorder (equipped
with playback facility) as the player and your VCR as the recorder.
PREPARATION
(1) Connect the camcorder's VIDEO OUT and AUDIO OUT
connectors to the VCR's front panel VIDEO IN and AUDIO
IN connectors.
™@.Use the L connector for
monaural connection.
™ When a Master Edit Control-
equipped JVC camcorder is
used, the camcorder is capable
‘SPECIAL FUNCTION
R.A.EDIT/PAUSE
AV COMPU-LINK
of controlling your VCR. PRESS (SET 4/-) FOR CHOICE
@ Press MENU, SET, and PRESS (MENU) TO ENG
SELECT as many times
as necessary to access the SPECIAL FUNCTION
screen. (CF p. 7)
@,Press:SET to choose "R.A.EDIT/PAUSE".
Press MENU as many times as necessary to exit.
© Refer to camcorder's instruction manual for set-up
procedure.
| OPERATION
[2] Press MENU, SET and
SELECT as many times as ‘TAPE DUB MODE
necessary to access the "TAPE. 9 ON
DUB MODE" screen. (37 p. 7) OFF
Press SET to choose "ON".
Press MENU as many times as
necessary to exit.
[5) Set the VCR's input mode to
AUX by pressing digit key "0". "AU" will appear instead ofa
channel number,
[6] Put the camcorder in the Play mode,
[7]--Put the VCR in the Record mode. ,
© Refer to the camcorder/recorder's instruction manual for
operation instructions.
PRESS (SET ¢/-) FOR CHOICE
PRESS (MENU) TO END
Audio Dubbing
Audio Dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack.
PREPARATION
[1] Connect an audio component to the recorder’s front panel
AUDIO L, R connectors. (For monaural equipment, use the L
connector.)
OPERATION
[2] Set the VCR's input mode to AUX by pressing digit key "0".
“AU" will appear instead of channel number.
[3} Start playback and engage the Still mode at the point from
« which’ you wish to start audio dubbing.
[4] Press: A. DUB. |
@ Your VCR enters the Audio Dubbing-Pause mode. (REC
“blinks, PLAY and PAUSE light'up on the FDP.)
{5} Start playback of the audio source, and then press PLAY.
® Audio dubbing will start. (REC blinks and PLAY is
displayed on the FDP.)
{6] Pressing PAUSE temporarily stops audio dubbing.
[7] Press STOP to stop audio dubbing.
EN-35