JVC HR-S5200U - Advanced Editing Techniques; Random Assemble Editing; Editing Corrections and Memory; Index Search for Editing

B>
@
Editing
(cont'd)
PAUSE/
SPECIAL
FUNCTION
Your VCR
REMOTE
PAUSE
Mini-plug Cable
(provided)
MENU
SELECT
R.A.EDIT
START
STOP
CANCEL
(R:A-EDIT START)
EN:36:
Random Assemble Editing
This
function
makes
it
easier
to
create
edited
videos
when
your
VCR
is
used
as
the
source
player
in
combination
with
another
video
deck
which
is
equipped
with
a
PAUSE
(ic.
REMOTE
PAUSE)
terminal.
You
can
pre-program
up
to
8
scenes
or
"cuts"
for
automatic
editing
in
the
sequence
you
have
specified.
i
PREPARATION
{£) Connect your VCR's VIDEO OUT and AUDIO OUT
connectors to the recording deck's VIDEO IN and AUDIO IN
connectors.
(2) Connect your VCR's PAUSE/SPECIAL FUNCTION
connector to the recording deck's PAUSE connector.
aw If the recording deck does not have a PAUSE connector,
connect to the R.A. EDIT connector.
{8] Turn both units on.
[4] Engage the recorder's AUX(iliary) mode.
(5) Press MENU, SET, and
SELECT
as
many
times
as
SPECIAL
FUNCTION
necessary
to
access
the
R.A
EDIT/PAUSE
SPECIAL
FUNCTION
screen.
noe
(= p.7)
[6] Press SET to choose "R.A.
EDIT/PAUSE".
[7] Press MENU as many times as
necessary to exit.
OPERATION
[6] Insert a recorded cassette into
your VCR.
(3) Play back the tape in your VCR.
Press MENU, SET and SELECT
as many times as necessary to
access the R.A. EDIT screen.
@ The screen is superimposed
‘on the video playback.
(fi) Use the SHUTTLE PLUS
PRESS (SET 4/-) FOR CHOICE
PRESS tent 8 END
button
to
search
for
the
point
AA
FOr
23
EDIT
MODE
where
you
want
an
edited
scene
Ye
to
start,
and
press
SELECT.
H
§
The
cut-in
point
is
registered
H
in
memory.
;
TTL
0:00:00
CNT
0:02:23
[2] Use the SHUTTLE PLUS
button to search for the point
where you want the scene to
end, and press SELECT.
8 The cut-out point is registered
in memory.
@ The "TTL" reading displays
the total running time of the
edited scenes.
[3] Specify additional scenes by
repeating steps 11 ~ 12.
pl tag
coon en me 6 Ae:
2 5
2
g
SHUTTLE PLUS
(Continued on next page.)
[@ Ansert a cassette (with safety tab
intact) into the recording deck,
and put the recording deck in
the Record-Pause mode.
[iS] Press R.A-EDIT START.
@ The function begins automatic
editing; all the specified scenes
are copied to the recording
deck
in
sequential
order.
MT
og
POUT
MODE
™
The
on-screen
display
remains
0:10:20
21:40
superimposed while your VCR ; 47
1:00:36
searches for each scene (the
blinking cursor points to the
scene number presently being THLO:18:40 CNT 1:00:38
searched), and is not displayed
while the scenes are being edited.
® While a scene is being searched, the recording deck
automatically enters the Record-Pause mode.
"SEARCHING" appears on the screen.
@ When Random Assemble Editing is finished, your VCR
enters the Still mode, the recording deck enters the Record-
Pause mode; and’ the cursor blinks at the next available
scene number,
[i] Press MENU as many times as necessary to exit.
{fi
Press
STOP
on
both
decks
to
end
Random
Assemble
Editing.
"ERROR" WARNING
If you choose "AV COMPU-LINK"
by mistake in step 6 and then reach
the R.A. EDIT screen in step 10,
the "ERROR" display will appear
as shown on the right.
Be sure to choose “R.A. EDIT/
PAUSE" in step 6 to perform
Random Assemble Editing.
-ERROR-
CHOOSE SPECIAL FUNCTION
ON MAIN MENU AND SELECT
RA. EDIT/PAUSE
BEFORE YOU BEGIN
RA EDIT
PRESS (MENU) TO MAIN MENU
OPTIONAL RM-V403U MULTI-
BRAND R.A.EDIT CONTROLLER °
By connecting this controller to your VCR's R.A-EDIT Connector,
Random Assemble Editing will become possible in conjunction
with
a
second
non-JVC
VCR.
The
controller
is
compatible
with
various
major
VCR
brands
—
convenient
especially
if
you
already
own a VCR other than JVC. For compatible systems and
availability,
please
consult
your
JVC
dealer.
|
NOTE:
You
can
also
monitor
the
sound
when
searching
for
scenes
you
want
to
edit
in
steps
11
-
12.
Since
you
can
hear
the
soundtrack
during
selection,
you
can
avoid
abrupt or unnatural sounding scene-to-scene connections.
[ TO MAKE CORRECTIONS _|
During step 11 or 12, you can
correcta cut-in or cut-out point
using the remote control. Each time,
the CANCEL button is pressed, the
immediately preceding point is
cleared and can be reset.
RA EDIT. EDIT MODE
4 9.020 0:02:51
M 4 0:10:20 0:21:40
va
8
TTLO11:48 «© CNT 0:21:40
ww Example: The cut-out point for "2" can be changed by pressing
CANCEL once (to clear it) and re-setting it. By pressing
CANCEL more times, you can back up to previous points for
re-setting, but all points in between will be cleared in the
process, (e.g, To reach the cut-out point for "1", the cut-in and -
out points for "2" will be cleared.)
MEMORY CAPACITY
Random Assemble Editing utilizes the same memory space as the
VCR's timer; so the number of sequences available to this
function may not be 8, depending on how many programs are
already stored in memory.
= Example: Only sequences 1 - 5
are available because three
programs are stored in the timer
memory.
TTL0:00:00 CNT 0:01:30
mw Example: The "PROGRAM
FULL" screen appears when the
timer memory is full (all 8
programs are used). To cancel a
program, 7 p. 32:
RA EDIT EDIT MODE
PROGRAM FULL
/ USING INDEX SEARCH WITH
RANDOM ASSEMBLE EDITING
In step 11, Index Search can also be used to locate your edit
points. When used, "INDEX" and the index number will appear
on the R.A.Edit screen. For Index Search (7 p. 22,
2 Using Index Search during R.A-Edit will result in a reduction
in accuracy.
ae
® This function requires that index marks are previously recorded
71L.0:00:00 CNT 0:01:90
on your tape at the desired edit points.
EN-37