JVC HR-S5200U - Setting Up Your VCR (Continued); S-Video Connection; Setting Your VCR Clock; Auto Daylight Saving Time

Setting Up Your VCR (cont'd)
Or...
S-VIDEO CONNECTION |
[1}*Connect tlie antenna, VCR and TV as per "RE t
CONNECTION".
[2] Connect the VCR's S VIDEO OUT to the TV's S VIDEO IN
connectors.
[S3) ‘Connect the VCR's AUDIO OUT and VIDEO OUT to the
TV'S AV-IN connectors.
Antenna or Cable
AC Power
ANTENNA-IN
{Antenna or Cable
input)
TV OUT
Back of VCR ;
VIDEO/AUDIO
OUT
; S-Video Cable
AC Outiet hy, Se (provided)
Video/Audio Cable (provided)
VIDEO/AUDIO
IN
NOTES:
"To make the most of Super VHS picture performance, we
recommend you use the S-VIDEO connection.
To operate the VCR with your TV using the S VIDEO connection,
set your TY to the AV.mode.
EN-10
IF YOU HAVE ATV SET WITH S-VIDEO INPUTCONNECTORS
POR INSTRUCCIONES EN |
ESPANOL VEA p. 42 - 43.
Setting your VCR's clock
Since your VCR bases all of its timer recording start and stop "decisions" on the time kept by its built-in clock, accurate setting of this
clock is crucial for proper timer-recording results.
Press POWER.
™ If watching on channel 3 or 4, press TV/VIDEO to select
POWER ON;. the VIDEO mode. The VERS VIDEO indicator will light.
SELECT CHANNEL
3 OR 4 (OR AV MODE)
Press MENU.
m™ The Main Menu screen will
SET-UP MENU
appear, #INITIAL SET
mif the VCR Plus+ screen CABLE BOX SET
appears press MENU again.
Press SET to move the cursor
to "SET-UP MENU" and then
press SELECT.
Press SET to, move the cursor to. "INITIAL SET", and then
f press SELECT.
5 “You can change the on-screen language.’
Press REW for Spanish, PLAY for French.
a Press FF to change back to English:
PRESS (SELECT, SET 4/~)
PRESS (MEN) TOEND
Press SET to set thie moniii,
and then'press SELECT,
7 Repeat step 6 to set the day, .
year and time (making sure
INITIAL SET
THU
ME oR au
that AM or'PM is correct). ee als prs 13 AF oem
@ The day of the week will PRESS (paar Sere)
£ automatically appear. PRESS MENU) TOEND ?
8 if you want to take a achaze of Auto’ D.S,T. (Daylight
Saving Tinie) (See below), press SET to choose ON:
TO. MAKE CORRECTIONS
Press‘SELECT'so that the item you want to change blinks. Reset
that item. Continue to step 9.
Auto Daylight Saving Time
Your VCR is incorporated with the D.S.T. function which
automatically adjusts the clock at the start/end of Daylight Saving
Time, making manual re-setting unnecessary.
When D.S.T. is set to ON:
“VGR's clock is adjusted t0'3: “
@On the last Sunday of October, 1 niinute after 1:59AM the
VCR's clock is adjusted to 1:00AM.
; You can also use the POWER, MENU, REW, FF, SET
and SELECT buttons on the VCR.
W If you live in an area without Daylight Saving Time, keep
D.S.T. OFF when setting the clock.
EN-11
On the: first Sunday-of:April;, 1" minute: after1:59AM the. .:
3:00,