JVC HR-S5200U - Setting Up Your VCR (Continued); Setting the VCR Tuner; Managing Tuner Channels

Setting
Up
Your
VCR
[POR
INSTRUCCIONES
EN
(cont'd)
ESPANOL
VEA
p.
42
-
43.
FOLLOW INSTRUCTIONS ON THIS PAGE OR ON P. 14- |
DEPENDING ON YOUR CABLE BOX.
Setting your VCR's tuner
The
Auto
Set
feature
introduced
here
automatically
assigns
receivable
channels
in
your
area
to
the
CHANNEL
UP/DOWN
buttons
and
skips
the
others
so
you
won't
have
to
go
through
any
"blank"
channels
to
get
to
the
one
you
want.
Press POWER.
POWER
ON;
@
If
watching
on
channel
3
or
4,
press
TV/VIDEO
to
select
SELECT
CHANNEL
the
VIDEO
mode.
The
VCR's
VIDEO
indicator
will
light.
3
OR
4
(OR
AV
MODE)
EERE
ee
2: JB. 20 Ne
Press MENU to access the
Main Menu screen.
mIf the VCR Plus+ screen
appears press MENU again.
Press.SET to move the cursor.
to "TUNER SET", and then.
press SELECT.
Press SET to move the cursor
to "BAND", and then press SELECT.
Nb
“Press SET to choose “TV" or
"CATV".
™ The BAND select feature
‘has 2'settings (TV and
CATV). Set'to TV if your
antenna provides only UHF
and VHF channels. Set to
CATV
if
your
antenna
PRESS
ESS
(Sa
Fone
cHoIce
system is a cable TV line.
6 Press MENU.
RT AUTO SET:
y Press SET to move the cursor to "AUTO CHANNEL SET",
** and then press SELECT.
@ Auto set is in progress and "SCANNING..." is displayed.
When available channels are scanned, "ADD" will be
displayed on the screen.
m When unavailable channels are skipped, “"SKIP" will be
displayed.
@ After completion of auto set, the lowest tuned-in channel
number and "SCAN COMPLETED" are displayed.
wlf "SCAN COMPLETED — NO SIGNAL —" is
displayed, check the band setting and connections, and,
start again. CF p. 8-10.
UIDE CHANNEL MAP
“ata
- FUNER SET:
‘BAND.
ARC
Ltt CHANNEL SET
MANUAL CI HANNEL SET
GUIDE CHANNEL SET
GUIDE CHANNEL MAP
PRESS (SELECT, SET +/-)
PRESS (MENU) TO END
‘You can also use the POWER, MENU, SET
and SELECT buttons on the VCR. - ‘ or
8 Press MENU as maiy ‘tiies'as necessary to exit.
Now go to cp. 17 "Setting up the VCR Plus+ feature”.
EN-12
CH. SKIP
‘Digit keys
SELECT
MENU
CH/SET +/-
To add a "skipped" channel to your
VCR's tuner
(1] Press MENU to access the Main Menu screen.
If the VCR Plus+ screen appears press MENU again.
[2] Press SET to move the cursor to "TUNER SET", and then
press SELECT.
(3) Press SET to move the cursor to MANUAL CHANNEL SET
"AFC", and then press SELECT.
[4] Press SET to choose "SPCL". onde hoo
[5] Press MENU.
(5)
SELECT CH NO. AND
Press SET to move the cursor to ress Ess apse as
"MANUAL CHANNEL SET",
and then press SELECT.
[7] Input the channe! number using the Digit keys.
8] Press ADD to store the channel.”
‘Specify another channel number or press MENU as many
times as necessary to exit.
To delete an unwanted channel from
your VCR's tuner
[1] Press MENU to access the Main Menu screen.
___W If the VOR Plus+ screen appears press MENU again, :
[2] Press SET to move the cursor to "TUNER SET”, and then
press SELECT.
(3) Press SET to move the cursor
to "MANUAL CHANNEL
SET", and then press SELECT.
Input the channel number using
the Digit keys or: the CH +/—
buttons.
Press CH. SKIP to delete the
channel.
Specify another channel number or press MENU as many
times as necessary to exit.
" MANUAL CHANNEL eT
cH 8 Sue
SELECT CH NO,
PRESS eet Sk
PRESS (MENU) TO END
&
&
8
EN-13