JVC HR-S5200U - Setting Up Your VCR (Continued); Cable Box Controller Setup; Cable Box Output Channel

Setting Up Your VCR (cont'd)
Setting your VCR's tuner and Cable Box Controller
Follow these steps if you use an external Cable Box (descrambler) to receive cable stations. When properly set-up, the Multi-System
Cable Box Controller will automatically switch channels on your Cable Box so you can timer-record two or more cable TV stations. It
works for Cable TV sliows that‘have been programmed using VCR Plus+ (> p. 28) or On-Screen (c> p. 30) programming.
Suggested Locations
Attach to top of VCR with Controller's transmitter pointed towards
Cable Box's remote sensor window.
Cable Box
Your VCR
Controller
(suggested locations)
Cable Box
ra
is
Controller
Connected
to VIDEO/
AUDIO IN
Connected to
ANT. IN
Your VCR
Find a location for the Controller which offers an
unobstructed path to the Cable Box's remote sensor window;
otherwise the Controller's infrared beam will not be able to
teach and control your Cable Box.
Attach the Controller using the supplied adhesive strips.
If your Cable Box has VIDEO OUT/AUDIO OUT
connectors...
42 Connect them to the VIDEO IN and AUDIO IN connectors
of your VCR.
If your Cable Box does not have VIDEO OUT/AUDIO OUT.
connectors...
3 Connect the Cable Box's antenna output terminal to the ANT.
IN (Antenna) terminal of your VCR.
@ Refer to the Cable Box's instruction manual for more
information.
bo ~ > 3 Pees Weed Bar oe Hs
4 Connect thie Cable Box Controlier to your VCR's CABLE
BOX terminal.
J!
NOTE:
@ About Your Cable Box:
This VCR has two separate methods to control your Cable Box. The
provided Wireless Remote Contro! Unit can-controf your Cable Box.
The VCR's Cable Box Controller can also control your Cable Box.
The former eliminates the need for a separate Cable Box Remote
Control Unit. The latter is to change your Cable Box's channel
number during timer recordings. Each method must be set up
separately. To set up the VCR's Remote Control Unit <> p. 33.
TVNIDEO
7-9
6,11
7-10
Press POWER.
§ If watching on channel 3 or 4, press TV/VIDEO to select
the VIDEO mode. The VCR's VIDEO indicator will tight.
1
17
Press MENU until the Main
Menu appears (7 p.7).
Press SET to move the
cursor to SET-UP MENU.
Then press SELECT.
Press SET to move the
cursor to CABLE BOX
SET.
Then press SELECT.
>. Press SET to move the.
cursor to CABLE BOX
OUTPUT. Then press
SELECT:
Press SET to choose the
output channel number of
your Cable Box (channels 2 * |
thru 6) if.it's-connected to
* your VCR via RF connection.
@ For example; choose "ON:
CH3" if the Cable Box
provides its output on channel 3.
@ Choose "ON LINE" if the Cable Box is connected to
your VCR's Audio/Video input connectors.
Press MENU.
™ Cable Box Set menu will appear.
MAIN MENU
PROGRAM SET
FUNCTION SET
TUNER SET
@ SET-UP MENU
RAEDIT
PRESS (SELECT SET +/+)
PRESS (MENU) TO END
SET-UP MENU
INITIAL SET
CABLE BOX SET:
~ press (eect SET #/-)
PRESS (MENU) TO END
CAGLE BOX SET
@ CABLE BOX OUTPUT
BRAND SET
PRESS (SELECT, SET 4/4).
PRESS (MENU) TO END
CABLE BOX OUTPI
OLE Be UTPUT
PRESS (Set sr} FOR CHOICE
PRESS fi nt %
NU) TOEND
(Continued on next page.)
EN-15