EN 11
Clock
Perform clock setting only if the clock has not been set correctly
by the Plug & Play function or you use a cable box. Access the
Clock Set screen to perform the Semi-Auto or Manual clock
setting procedure. Each procedure starts from step 5.
If you use a cable box, set the clock manually. (Z pg. 13)
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
Preparation
TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS INITIAL SET
SCREEN
3
At the Main Menu screen,
move the highlight bar
(arrow) to “INITIAL SET” by
pressing CH5∞ or TIME
SCAN %fi, then press OK
or TIME SCAN .
ACCESS CLOCK SET
SCREEN
4
Move the highlight bar
(arrow) at the Initial Set
screen to “CLOCK SET” by
pressing TIME SCAN %fi,
then press OK or TIME
SCAN .
● "CABLE BOX USERS SET
CLOCK MANUALLY"
appears on the screen for about 5 seconds, then the
Clock Set screen appears.
%
%
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
HI-FI REC LEVEL CTL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
=CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
CABLE BOX SET
DBS RECEIVER SET
JLIP ID NO. SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
123
456
7
89
0
2
4
1
3
To Next Page
Loading...
