EasyManua.ls Logo

JVC HR-S9500U - Diting; Edit from a Camcorder; Make Connections

JVC HR-S9500U
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54 EN
0
4
1
3
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
If connecting a camcorder with an S-VIDEO output
connector, it is recommended to use the S-VIDEO
connection to minimize picture degradation while editing.
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT MODE
3
Set to "AUX". Press the NUMBER key “0” and/or CH to
select depending on the connector being used – "L-1"
for the rear panel input connectors, or "F-1" for the front
panel input connectors.
ACCESS MAIN MENU SCREEN
4
Press MENU.
ACCESS FUNCTION SET SCREEN
5
Press CH 5∞ or TIME SCAN %fi to move the highlight
bar (arrow) to “FUNCTION SET”, then press OK or
TIME SCAN .
SELECT AUX INPUT SET MODE
6
a– FRONT S-VIDEO IN : Move the highlight bar (arrow)
to "FRONT AUX INPUT" by pressing CH 5∞ or
TIME SCAN %fi, then press OK or TIME SCAN to
set to "S-VIDEO".
b– FRONT VIDEO IN: Move the highlight bar (arrow) to
"FRONT AUX INPUT" by pressing CH 5∞ or TIME
SCAN %fi, then press OK or TIME SCAN to set to
"VIDEO".
c– REAR S-VIDEO IN: Move the highlight bar (arrow) to
"REAR AUX INPUT" by pressing CH 5∞ or TIME
SCAN %fi, then press
OK or TIME SCAN to
set to "S-VIDEO".
d– REAR VIDEO IN: Move
the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing CH
5∞ or TIME SCAN
%fi, then press OK or
TIME SCAN to set to
"VIDEO".
NUMBER "0"
Recorder
Your VCR
To rear panel
REMOTE PAUSE/AV
COMPULINK
connector
Mini-plug cable
(not supplied)
(JVC camcorder
only)
Audio/Video
cable
(supplied)
Camcorder
VIDEO
OUT
AUDIO
OUT
EDIT
VIDEO
IN
AUDIO IN
%
S-
VIDEO
IN
S-VIDEO
OUT
S-VIDEO
cable
(supplied)
Player
%
%
EDITING
%
%
OK
MENU
MENU
OK
TIME SCAN
CH
FUNCTION
= AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
DIGITAL R3 ON
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
NEXT PAGE
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
= REAR AUX INPUT VIDEO
TAPE DUB MODE ON
CA RECORD OFF
CA PLAYBACK OFF
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
AUDIO MONITOR HI-FI
S-VHS MODE ON
AV COMPU-LINK ON
VIDEO CALIBRATION ON
TIMESCAN AUDIO ON
= FRONT AUX INPUT VIDEO
NEXT PAGE
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END

Table of Contents

Related product manuals