33
When playing HiFi cassette tapes recorded
on another VCR, the sound output may be
distorted. This is normal and no indication
of a unit malfunction. Try to minimize sound
distortions by using SET +/– or change to
MONO by pressing of A.MONITOR.
NICAM Stereo Recording and Playback
Playback
Use A.MONITOR to select under stereo/mono or bilingual
playback. See the table below for more information.
Bilingual playback
performed as follows:
On-screen indications
(for 4 sec.)
Stereo playback
performed in:
Simultaneously
both languages
from HiFi track
(Mixed sounds)
Original sound
track (Sub sound)
One's mother
tongue dubbing
(Main sound)
One's mother
tongue dubbing
(Main sound)
Stereo
Mono
Right channel
signal output from
both loudspeakers
Left channel signal
output from both
loudspeakers
L CH
R CH
MONO
STEREO
Note:
HiFi signal indication
It will be displayed for approx. 4
seconds when playing HiFi video
cassette tapes.
HI-FI
2A77501B E(33-37) 5/30/02, 9:23 PM33
To Next Page
Loading...
