EasyManua.ls Logo

JVC HR-XV32E - VHS Recording Features; Basic Recording Process and Safety Features

JVC HR-XV32E
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Masterpage:Right-No-Heading
EN 21
Filename [XV3EX_07S-VHS.fm]
Page 21 August 22, 2003 12:20 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press p. The current setting appears on the front
display panel or TV screen. Press p again to change
the setting while the tape speed is displayed on the TV
screen.
E
Start recording.
Press and hold 7 and press 4 on the remote control, or
press 7 on the unit.
If “O.S.D.” is set to “ON” ( pg. 63), “MARK” blinks on the
screen while an index code is being marked.
When “DIRECT REC” is set to “ON” (
pg. 63), if you press
any button just after pressing 7 on the unit (or 7 and 4 on
the remote control), the unit may not function properly.
F
Pause/Resume recording.
Press 9. Press 4 to resume recording.
You can select channel during the Record Pause mode.
G
Stop recording.
Press 8. Then press x on the VHS deck to remove the
cassette.
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
pg. 23)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded. (
pg. 63)
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
pg. 21, 22, 26), the
recording will resume automatically when power is restored
to the unit unless the unit’s memory backup has expired.
Accidental erasure
prevention
To prevent accidental recording
on a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
Record safety tab
XV3EX_01.book Page 21 Friday, August 22, 2003 12:21 PM

Other manuals for JVC HR-XV32E

Related product manuals