Filename [XVS20EK_06Index.fm]
Masterpage:Left+
12
Page 12 March 28, 2003 6:55 pm
INDEX (cont.)
ON-SCREEN DISPLAY (S-VHS deck)
When “O.S.D.” is set to “ON” (
墌
pg. 72), various operational indicators appear on the TV screen.
For On-screen display for DVD deck, refer to “Checking the DVD function status” (
墌
pg. 46).
A
Operation Mode Indicators
B
Tape Speed (SP/LP/EP)
C
Tape Direction
D
Index Mark Indicator (MARK)
墌
pg. 28
E
Counter Display
F
Tape Remaining Time Indicator
墌
pg. 30
G
Audio Mode Display
墌
pg. 27
H
Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
3
or
5
from the Stop mode or
perform an Index Search.
(
墌
pg. 26) The position of
“
q
” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
I
PDC* Indicator
墌
pg. 33, 35
* VPS (Video Programme System) recording is not currently available
in the U.K. and not possible with this unit.
J
Type of Broadcast
墌
pg. 30
K
Current Day/Month/Year
L
Clock Display
M
Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When “L-2 SELECT” is set to “SAT” (
墌
pg. 63), “SAT” appears
instead of “L-2”.
N
S-VHS ET Indicator
(S-VHS ET : ON/S-VHS ET : OFF)
墌
pg. 71
O
“Cassette Loaded” Mark
Beginning End
XVS20EK_01.book Page 12 Friday, March 28, 2003 7:00 PM
To Next Page
Loading...
