EasyManua.ls Logo

JVC HR-XVS20EK - Page 57

JVC HR-XVS20EK
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Masterpage:Right-No-Heading
57
Filename [XVS20EK_08DVD.fm]
Page 57 March 28, 2003 6:55 pm
Basic Playback
A
Load the disc.
A
Press
x
on the DVD deck to open the disc tray.
The unit’s power comes on automatically.
B
Place the disc in the disc tray.
For details, refer to “Placing a Disc” (
pg. 8).
C
Press
x
on the DVD deck to close the disc tray.
Pressing
4
also close the disc tray.
B
Select the DVD deck.
On the unit
Press
S-VHS/DVD
repeatedly so that the DVD indicator
lights up.
On the remote control
Press
DVD
so that the DVD indicator lights up.
C
Select the track.
Press
2
to locate the beginning of the previous track,
and press
6
to locate the beginning of the next track.
You can skip a track across a group. Press
6
to skip to the
first track of the next group when the last track of the current
group is selected.
D
Start playback.
Press
4
.
E
Pause playback.
Press
9
.
To resume normal playback, press
4
.
F
Stop playback.
Press
8
. Press
x
on the DVD deck to open the disc tray,
then remove the disc.
NOTE:
4
,
8
,
9
,
2
and
6
buttons function the same as with Audio
CD discs, however,
3
or
5
does not function for MP3
playback.
Track/group selection
Track selection
Perform steps below during playback.
Group selection
Perform steps below in stop mode.
To select a 1- or 2-digit track/group
Press the appropriate
number keys
to select the track/group
number.
To select a 3-digit track
A
Press and hold the
number key “+10”
for more than 2
seconds during playback.
“_ – –” appears on the front display panel.
B
Press the appropriate
number keys
to select the
desired track number directly.
Turn on the TV and select the video channel (or AV
mode).
Slide the
TV/S-VHS/DVD
switch to the right.
Current track number
Current group number
Examples:
To select track 5, press the
number key “5”
.
To select track 15, press the
number key “+10”
and
“5”
.
To select track 25, press
number key “+10”
twice, then
“5”
.
Examples:
To select track 254: press and hold the
number key “+10”
for
more than 2 seconds, then press
number key “2”
,
“5”
and
“4”
.
XVS20EK_01.book Page 57 Friday, March 28, 2003 7:00 PM

Table of Contents

Related product manuals