JVC HR-XVS20EK - Delete a Channel; Change Station Channel Position

Masterpage:Right-No-Heading
81
Filename [XVS20EK_10Subsidiary.fm]
Page 81 April 1, 2003 3:12 pm
Delete A Channel
A
Select the item.
Press
rt w e
until the item you want to delete begins
blinking.
B
Delete a channel.
Press
&
.
● The item directly beneath the cancelled one moves up one
line.
● Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press SET UP MENU.
Change Station Channel Position
A
Select the item.
Press
rt w e
until the item you want to move begins
blinking. Then press OK and the station name (ID) and its
channel (CH) number begin blinking.
B
Select the new position.
Press
rt w e
to move the station to the new channel
position, then press OK.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move
down one space.
● Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press SET UP MENU.
Perform steps A and B of “Manual Channel Set” on page 80
to access the Confirmation screen before continuing.
Perform steps A and B of “Manual Channel Set” on page 80
to access the Confirmation screen before continuing.
XVS20EK_10Subsidiary.fm Page 81 Tuesday, April 1, 2003 3:12 PM