1-30 (No.22041)
2.5 Speaker section
2.5.1 Main speaker
2.5.1.1 Removing the front cover
(See Fig.1, 2)
CAUTION:
Do not break or damage the front panel and body that are
glued at the joints a. (See Fig.1)
(1) Remove the four screws A on the front of the body respec-
tively.
(2) Remove the front cover toward the front and disconnect the
yellow and black wires from the two tweeter speaker termi-
nals.
Fig.1
Fig.2
Joint a
Joint a
Tweeter speaker
Front cover
To Next Page
Loading...
