3
HV-32/28P40BJ / LCT1687-001A-U / English
To enjoy even better picture quality
The picture quality of this TV is controlled by a combination of three functions (PICTURE MODE,
DIGITAL VNR, and Super DigiPure).
By adjusting these three functions, you can change the picture quality to suit your preferences. The
initial settings of the three functions are as follows.
PICTURE MODE : BRIGHT
DIGITAL VNR : AUTO(LOW)
Super DigiPure : AUTO
If you want a sharper picture, change to the following settings.
(However, the picture quality may not change very much if you are already watching a clear
picture.)
PICTURE MODE : BRIGHT
DIGITAL VNR : MIN
Super DigiPure : MAX
If there is a lot of noise (snow) in the picture, change to the following
settings.
PICTURE MODE : STANDARD
DIGITAL VNR : AUTO(HIGH)
Super DigiPure : MIN
Note:
• For detailed information about how to change these settings, see “PICTURE menu” on
page 25.
Safety_Eng.fm Page 3 Thursday, July 29, 2004 5:31 PM
To Next Page
Loading...
Need help?
General