M
Iris F-Number
Displays F-number of the lens iris.
N
Gain
0
Displays the gain value when in the Manual
Gain mode.
0
“LUX30” is displayed when in the low-light
shooting mode.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
O
AE Level
0
Displayed when
the AE function is activated.
0
When operated while manual operation is
disabled, “AE” blinks for about 5 seconds.
0
When face detection is enabled and [Face
Detect] is set to
“AF&AE”, q appears on the
left side of “AE”.
(A P
46 [Adjusting the Focusing by Face
Detection] )
P
Beautiful Skin
e
appears when Beautiful Skin is in
operation.
Memo :
0
If [Beautiful Skin] is turned off while the Display
0 screen is displayed, f appears for 3
seconds.
0
Displayed in the Display 0 screen only when
there is a change.
Q
Focus Display
0
Displays the approximate distance to the
subject in focus during manual focus.
0
When face detection is enabled, q appears
on the left side of e.
(A P46 [Adjusting the Focusing by Face
Detection] )
(A P91 [ Face Detect ] )
0
If [Main Menu] B [Camera Function]
B [AF
Assist] is set to “Area”, the
icon appears
on the left side of e.
(A P
90 [ AF Assist ] )
0
d
appears on the screen while auto focus
is locked.
Memo :
0
You can specify the display method (Feet/
Meter) in [Main Menu] B [LCD/VF] B [Display
Settings]
B [Focus].
This item will not be displayed when “Off” is
selected.
(A P98
[ Focus ] )
0
Displayed in the Display 0 screen only when
there is a change.
R
Zebra pattern
During zebra
pattern display,
(zebra icon)
is displayed on the display screen in Camera
mode.
(A P65 [Setting Zebra Pattern] )
S
Focus Assist
0
“FOCUS”
is displayed when auto focus is
activated.
(A P97 [ Focus Assist ] )
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
T
Date/Time Display
Displays the current date and time.
Memo :
0
The date/time display style can be specified in
[Main Menu
] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
(A P
99 [ Date Style ] )
(
A P99 [ Time Style ] )
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Date/Time] is
set to “Off”.
(A P
99 [ Date/Time ] )
0
When [Main Menu]
B [System] B [Record Set]
B [Time Stamp] is set to “On”, this item is not
displayed.
(A P
107 [ Time Stamp ] )
U
Zoom Display
0
Displays the zoom position. (Zoom bar or
value)
Dynamic Zoom Off:
.
Dynamic Zoom On:
.
0
The zoom bar will only be displayed for 3
seconds after the zoom operation is
activated.
0
The value will always be displayed.
0
If [Main Menu
] B [Camera Function] B
[OIS] B [OIS] is set to “Off”, or [Level] is set
to “Normal”:
Dynamic Zoom Off : Z00 to 99
Dynamic Zoom On
: Z00 to 149
0
If [Main Menu] B [Camera Function]
B
[OIS] B [Level] is set to “High”:
Dynamic Zoom Off : Z09 to 99
Dynamic Zoom On
:
Z09 to 149
114
Display Screen in Camera Mode
Display/Status Screen
To Next Page
Loading...
