JVC JY-HM360E - Connecting External Monitor

Connecting External
Monitor
0
To output live or playback video images and audio
sound to an external monitor, select the output signals
from the camera recorder, and connect using an
appropriate cable according to the monitor to be used.
0
Choose the most suitable terminal according to the
monitor in use.
0
[AV] terminal:
Outputs composite video and audio signals.
0
[HDMI] terminal:
Outputs HDMI signals.
Configure the settings in the [A/V Set] menu to match
the monitor to be connected.
(A P100 [ HDMI out ] )
Memo :
0
If the [HDMI] terminal is connected, configure the
settings in the [A/V Set] menu according to the monitor
to be connected.
(A P100 [ HDMI out ] )
.
AUX
INPUT2
INPUT1
DEVICE
AV
A
BATT.RELEASE
POWER
/CHG
B
HDMI
REMOTE
DC
REC
AV
DEVICE
DC
REMOTE
Audio (Lch)
Audio (Rch)
Video
GND
HDMI
AV input
* Select the output signal in [A/V Set] B [HDMI out].
(A P100 [ HDMI out ] )
* To display the menu screen or display screen on an
external monitor, set [A/V Set] B [Video Set]
B [Display On TV] to “On”.
(A P100 [ Display On TV ] )
Setting the Aspect
0
For setting the mode to convert images with a 16:9
aspect ratio to display on a 4:3 aspect ratio screen.
0
Set using [A/V Set] B [Video Set] B [SD Aspect].
0
The available modes include “Side Cut”, “Letter”
(blackened at the top and bottom), and “Squeeze” (full
size, compressed at the left and right).
(A P105 [ SD Aspect ] )
Memo :
0
When [Record Format] B [System] is set to “SD”,
and [SD Aspect] is set to “4:3”, this item cannot be
selected.
(A P105 [ System ] )
(A P105 [ SD Aspect ] )
Connecting External Monitor
125
Connecting External Devices