22
ENGLISH
BAS*
1
(bass)
Adjust the bass.
–06 to +06
TRE*
1
(treble)
Adjust the treble.
–06 to +06
FAD*
2
(fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL (balance)
Adjust the left and right speaker balance.
L06 to R06
LOUD*
1
(loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
VOL.A*
3
(volume adjust)
Adjust and store auto-adjustment
volume level for each source, comparing
to the FM volume level.
–05 to +05
VOL (volume)
Adjust the volume.
00 to 30
(or 50)*
4
*
1
When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “USER.”
*
2
If you are using a two-speaker system, set the
fader level to “00.”
*
3
You cannot make an adjustment for FM.
“FIX” appears.
*
4
Depending on the amplifier gain control
setting. (See page 24 for details.)
Selecting a preset sound mode — C-EQ
~ Enter functions mode.
Ÿ Select a preset sound mode.
Indication (For)
BAS TRE LOUD
(bass) (treble) (loudness)
USER (Flat sound) 00 00 OFF
ROCK (Rock or disco music) +03 +01 ON
CLASSIC (Classical music) +01 –02 OFF
POPS (Light music) +04 +01 OFF
HIP HOP
(Funk or rap music)
+02 00 ON
JAZZ (Jazz music) +02 +03 OFF
Adjusting the sound
1
2
Adjust the level.
EN22-27_KD-DV4202[E]3.indd 22EN22-27_KD-DV4202[E]3.indd 22 12/8/05 4:59:54 PM12/8/05 4:59:54 PM
To Next Page
Loading...
