ENGLISH
35REFERENCES
Symptom Remedy/Cause
DivX/MPEG Video/MP3/WMA/WAV
• Longer readout time is required. Readout time varies due to the complexity of the folder/
file configuration. Do not use too many hierarchies and
folders.
• Tracks cannot play back as you have intended
them to play.
Playback order is determined when files are recorded.
• No sound can be heard when picture is
displayed while playing a DivX/MPEG Video
file.
• Record the audio track using MP3 or Dolby Digital as the
audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
• Elapsed playing time is not correct. This sometimes occurs during playback. This is caused by
how the tracks are recorded.
• “PLEASE” and “EJECT” appear alternately on
the display.
Insert a disc that contains tracks of appropriate formats.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
CD changer
• “NO DISC” appears on the display. Insert a disc into the magazine.
• “NO MAG” appears on the display. Insert the magazine.
• “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
iPod/D. player
• The iPod or D. player does not turn on or does
not work.
• Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
• The sound is distorted. Deactivate the equalizer either on this unit or the
iPod/D. player.
• “NO IPOD” or “NO DP” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• Playback stops. The headphones are disconnected during playback.
Restart the playback operation (see page 20).
• No sound can be heard when connecting an
iPod nano.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
• No sound can be heard.
• “ERROR 01” appears on the display when
connecting a D. player.
Disconnect the adapter from the D. player. Then, connect
it again.
Continued on the next page
EN34-37_DV5306_001A_f.indd 35EN34-37_DV5306_001A_f.indd 35 11/10/06 6:15:48 PM11/10/06 6:15:48 PM
To Next Page
Loading...
Need help?
General
