37REFERENCES
Symptom Remedy/Cause
iPod
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
• The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
• “NO IPOD” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• Playback stops. The headphones are disconnected during playback.
Restart the playback operation (see page 21).
• No sound can be heard when connecting an
iPod nano.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
• “NO FILES” appears on the display. No tracks are stored. Import tracks to the iPod.
• “RESET 1” – “RESET 7” appears on the display. Disconnect the adapter from both this unit and iPod.
Then, connect it again.
• “RESET 8” appears on the display. Check the connection between the adapter and this
unit.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other
countries.
• DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
• Official DivX® Ultra Certified product
• Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX®
Media Format
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
EN34-39_DV4406_005A_f.indd 37EN34-39_DV4406_005A_f.indd 37 12/4/07 6:37:50 PM12/4/07 6:37:50 PM
To Next Page
Loading...
Need help?
General
