JVC KD-NX1R User Manual

Powers the unit on and off.

Activates the navigation system.

Procedure for entering the five-digit anti-theft code.

Unit lockout after multiple incorrect code entries.

Importance of keeping the code card safe and visible.

Procedure to remove the front panel for security.

Procedure to correctly reattach the front panel.

Instructions for switching the device on and off.

Important safety precautions while using the navigation system.

How to manage route recalculations and announcements.

Steps to activate the navigation system.

Overview of the primary navigation menu choices.

Process for starting the destination entry.

How to choose the country for the destination.

Inputting town names and completing place names.

Choosing between road or centre point for destination.

Inputting road names and selecting from lists.

Selecting a town centre as the destination.

Inputting centre names and selecting from lists.

Options for saving destinations, starting routes, and settings.

Choosing between fast, short, or dynamic routes.

Using traffic data for route calculation.

Saving destinations for later use.

How the system calculates routes and when to start driving.

Calculating bypass routes around traffic jams.

Using traffic data for route calculation.

Initiating dynamic routing based on traffic data.

Accessing and selecting saved destinations.

Adjusting the internal clock for accurate timekeeping.

Turning on the radio and selecting wavebands.

Using TP for traffic announcements and station switching.

Automatic TP transmitter selection when TMC is active.

Enabling or disabling TMC for dynamic navigation features.

Procedures for loading and removing CDs.

Procedures for managing CD magazines.

Selecting and playing CDs from the changer.

How to enter and leave the PSM menu.

Automatically adjusts volume based on vehicle speed.

Wiring for antenna, power, and ground connections.

Details of line-out, subwoofer, and AF input/output sockets.

Specific connections for the JVC CD changer.

Steps to insert and secure the radio into the dashboard.

Steps to unlock and withdraw the radio from the dashboard.

Adjusting unit springs for proper installation fit.

Explanation of Radio Data System signals and their use.

Selecting radio stations based on programme content type.

Power output, impedance, and frequency response details.

Frequency ranges, sensitivity, and selectivity for FM/AM/SW/LW.

Type, channels, frequency response, and dynamic range.