JVC KD-X351BT - BLUETOOTH; Auto Pairing; Receive a call

12
ENGLISH
Auto Pairing
When you connect the iPhone/iPod
touch/Android device to the USB input
terminal, pairing request (via Bluetooth) is
automatically activated.
Press the volume knob to pair once you
have confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device
is turned on.
–
[AUTO PAIRING] is set to [ON] . ( 15)
– JVC MUSIC PLAY application is installed
on the Android device
( 7) and [AUTO
MODE]
is selected ( 8) .
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI] . ( 13)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 13)
During a call:
• The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the volume knob.
Press
.
Reject a call
Press and hold
or the volume knob.
Press and hold
.
End a call
Press and hold
or the volume knob.
Press and hold
.
BLUETOOTH®