JVC KW-AV70BT - AV-IN Component Connection

36
ENGLISH
AV-IN name (  below)
You can connect an external component to the LINE IN/
VIDEO IN jacks. ( Installation/Connection Manual)
Preparation:
Select <AV-IN> for <AV Input> setting. ( page 50)
• <AV Input> setting can be changed only when
<Input> setting in <Navigation Input> is set to
< Off>.
Using other external components
To select the method to display the source control screen,  page 11.
• The operation buttons disappear when no operation is done for about 10seconds.
• To change settings for video playback,  page 46.
[ ] [–] [+]
Adjusts the volume.
[Mode] Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[AV MENU] Displays <AV Menu> screen.
1 Select “ AV-IN ” as the source. ( page 12)
2 Turn on the connected component and
start playing the source.
AV-IN
EN_KW-AV70JJW.indb 36 11/12/13 13:09