JVC KW-AV70BT - Using a Rear View Camera; Activating the Rear View Camera

48
ENGLISH
Activating the rear view camera
1 On <AV Menu> screen:
2
To deactivate, select <Off>.
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• For KW-AV70BT: To erase the caution message, touch
the screen.
Using a rear view camera
• To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view
camera,  Installation/Connection Manual.
To display the picture from the rear view
camera manually
On <AV Menu> screen:
When displaying the picture from the rear view
camera manually, you can change the setting of the
picture. (
 page 46)
To cancel the rear view screen
EN_KW-AV70JJW.indb 48 11/12/13 13:09