10
ENGLISH
When an FM stereo broadcast is
hard to receive
1 Press [AV MENU].
2
Press [Mode].
Listening to the radio
~ Press [SOURCE], then pre(s☞ s p[aTgUe N9)ER].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Press [BAND].
! Press [ 4 ] or¢ [ ] to search for a station—Auto Search.
• Manual Search: Hold either [4
]or [ ¢] until “Manual Search” appears on the screen, then press it
repeatedly.
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
3
Reception improves, but stereo effect will be lost.
• The MONO indicator lights up.
Preset no.
To restore stereo effect, select <Off>.
Band
Tuner/Standby Reception
indicators
PS (station name) for FM RDS. If no PS signal is coming in, the
tuned frequency appears.
☞ page 9
Sound mode
(☞ page 48)
PTY code for FM RDS
☞ page 12
: Buttons on the
touch panel. In
the explanation,
they are
indicated inside
[ ].
EN_KW-AVX710[EU].indb 10EN_KW-AVX710[EU].indb 10 07.12.17 5:46:10 PM07.12.17 5:46:10 PM
To Next Page
Loading...
