45
EXTERNAL DEVICES
ENGLISH
Using other external components
AV-INPUT
You can connect an external component to the LINE IN/VIDEO IN terminals.
☞
~
Press [SOURCE], then pr
(
ess
p
a
[A
ge
V
9
-I
)
N].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Turn on the connected component and start playing the source.
☞
To display the operation buttons ( page 20) while watching the playback picture
• If no operations are done for about five seconds, the operation buttons disappear.
• [ KEY] does not work when the source is “AV-IN.”
Touch the screen (center portion).
You can easily access to <Aspect> setting
menu by pressing [SHORT CUT] on the
touch panel, then...
Assigned title ( ☞ page 49)
Sound mode ( ☞ page 48)
: Buttons on the touch panel. In the explanation, they are indicated inside [ ].
Touch the screen (center portion).
These buttons also work when they are not shown on the touch panel (while watching the playback picture).
Continued on the next page
☞ page 48
EN_KW-AVX710[EU].indb 45EN_KW-AVX710[EU].indb 45 07.12.17 5:46:31 PM07.12.17 5:46:31 PM
To Next Page
Loading...
