JVC KW-AVX736 - Picture and Aspect Ratio Adjustments; Language and NTSC;PAL Settings

26
Menu item Selectable setting/item
Initial: Underlined
Display
Picture Adjust You can adjust the following to make the screen clear and legible for watching
the playback picture. The setting will be stored—one for “ DISC/USB ”
(common) and the other for “ AV-IN .”
Press [5] or [∞] to adjust. (–15 to +15; Initial 00)
♦
Bright
♦
Contrast
♦
Color
♦
Tint
: Adjust if the picture is too bright or too dark.
: Adjust the contrast.
: Adjust the color of the picture—lighter or darker.
: Adjust the tint if the human skin color is unnatural.
• You can adjust the tint only when <NTSC/PAL> is set
to <NTSC> (see below). In other cases, <Fix> appears
and the tint cannot be adjusted.
Aspect You can change the aspect ratio of the picture.
• Not adjustable when no picture is shown.
Aspect ratio of the incoming signal
4:3 16:9
Regular:
For 4:3 original pictures
Full:
For 16:9 original pictures
Panorama:
For viewing 4:3 pictures
naturally on the wide screen
Auto: • For “ DISC ”: Aspect ratio is automatically
selected to match the incoming signals.
• For the other video sources: Aspect ratio is
fixed to <Regular>.
Language Select the indication language shown on the screen.
♦
English, Español, Français, Deutsch, Italiano, Nederlands, Svenska,
Dansk, Руccĸий, Português,
, , , ,
Türkçe, ,
• The characters you can enter for assigning the titles also change according to
the language selected. ( 49)
• Turn off the power and on again so that your setting takes effect.
NTSC/PAL Select the color system of the external monitor.
♦
NTSC, PAL
• This setting is valid only to the external monitor connected.
EN_KW-AVX836[U]3.indb 26EN_KW-AVX836[U]3.indb 26 10.1.16 5:19:03 PM10.1.16 5:19:03 PM