JVC KW-AVX848 - Rear View Camera Integration; Activating and Displaying Rear Camera

43
ENGLISH
Activating the rear view camera
1 On <AV Menu>:
2
To deactivate, select <Off>.
Using a rear view camera
• To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view
camera, see the Installation/Connection Manual.
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• For KW-AVX840: To erase the caution message, touch
the screen.
To display the picture from the rear view
camera manually
On <AV Menu>:
When displaying the picture from the rear view
camera manually, you can change the setting of the
picture. (☞ page 41)
To cancel the rear view screen, hold MENU/ATT to
display <AV Menu>, then press [AV].
EN_KW-AVX840JJW.indb 43EN_KW-AVX840JJW.indb 43 11/01/19 13:1911/01/19 13:19