57
ENGLISH
Mobile phone
Menu items Selectable setting/item Initial: Underlined
Connection
♦ Connect
♦ Disconnect
: ☞ page 51
: ☞ page 51
PIN Code Changes the PIN code of the unit.
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device — ”JVC Unit.”
Device Address Shows the MAC address of the unit.
Phone Device*
1
Shows the phone device name.
Audio Device*
2
Shows the audio device name.
Auto connect
♦ Off
♦ On
: Cancels.
: The connection is automatically established with the last connected
Bluetooth device when the unit is turned on.
HF/Audio
Output
Select the speakers used for Bluetooth (both phone use and audio player).
♦ Front
♦ All
: From front speakers only.
: From all speakers.
Initialize Hold [Enter] to initialize all settings you have made for using Bluetooth mobile phone and
Bluetooth audio player.
Auto Answer *
1
♦ Off
♦ On
: The unit does not answer the calls automatically. Answer the calls
manually.
: The unit answers the incoming calls automatically.
SMS Notify*
1
♦ Off
♦ On
: The unit does not inform you of the arrival of a message.
: The unit informs you of the arrival of a message by ringing and
displaying “Receiving Message.”
Ring Mode*
1
♦ System
♦ Phone
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This function may not
work depending on the mobile phone.)
Ring Tone
Change*
1
When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for
received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
♦ Call Tone
♦ Message Tone
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
*
1
Appears only for the phone setting screen.
*
2
Appears only for <Mode> while “
BT Audio
” is selected as the source.
Bluetooth audio player
On “
BT Audio
” source control screen:
Bluetooth device settings
EN_BT.indd 57EN_BT.indd 57 11/01/19 15:4211/01/19 15:42
To Next Page
Loading...
