9
English |
External ComponentsExternal Components
Using external audio/video players
Ñ Starting playback
1 Connect an external component to the AV-IN
input terminal. (P.15)
2 Press the < > button.
3 Touch [AV-IN].
4 Turn on the connected component and start
playing the source.
Ñ For Video playback
1 When the operation buttons are not displayed
on the screen, touch the display.
1
[ ] : You can adjust image quality in video
screen.
[INITIALIZE] : To clear the adjustment.
✎ NOTE
• When the picture from the rear view camera is
displayed on the AV-IN screen, the picture output
from the Visual Output terminal disappears.
Rear view camera
To use a rear view camera, the REVERSE lead
connection is required. For connecting a rear view
camera. (P.15)
Ñ Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• The rst touch removes the Caution, and the
second touch closes the Camera Screen.
Learning function of steering
remote
This function is available only when your vehicle
is equipped with the electrical steering remote
controller.
1 Press the < > button.
2 Touch [Settings].
3 Touch [System].
4 Touch [Steering Remote].
5 Touch the function you want to set.
6 Press and hold the steering remote controller
button.
✎ NOTE
• You can have the unit learned all buttons at a time.
In that case, press the all buttons one at a time and
after pressing all of them, touch [6] in Steering
Remote Controller Setting screen.
7 Repeat steps 5 and 6 as necessary.
8 Touch [6].
✎ NOTE
• Touch [Initialize] and then touch [Yes] to set all the
settings to the initial default settings.
Reverse withATT (-20dB)
When the gear is shifted to the reverse (R) position,
the volume of the device is adjusted.
1 Press the < > button.
2 Touch [Settings].
3 Touch [System].
4 Touch [Reverse with ATT].
5 Touch [T] or [U] set to [ON]/[OFF].
✎ NOTE
• The setting value is ON (default)
To Next Page
Loading...
Need help?
General
