JVC KW-M180DBT - Page 23

23
English |
Installation
[1]
USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately
[3]
KW-M180DBT only
Ñ Connecting an iPhone/Android
ANT
CAM IN VIDEO OUT VIDEO IN
AV IN
L
R
FRONT OUTREAR OUT
M4x6
DAB
5V=1.5A
USB cable
[2]
Android smartphone
[2]
Cap
USB terminal
[1]
(1.0 m)
Lightning-USB cable
[3]
iPhone
[2]
Ñ Wiring harness connector function guide
Pin Color and function
A-4 Yellow Battery
A-5 Blue
[1]
Power Control
A-7 Red Ignition (ACC)
A-8 Black Earth (Ground) Connection
B-1/ B-2 Purple (+) / Purple/Black (–) Rear Right
B-3/ B-4 Gray (+) / Gray/Black (–) Front Right
B-5/ B-6 White (+) / White/Black (–) Front Left
B-7/ B-8 Green (+) / Green/Black (–) Rear Left
[1]
Max. 150mA, 12V
• Speaker Impedance: 4-8 Ω
! CAUTION
Before you connect the commercially available
ISO connectors to the unit, check the following
condition:
• Make sure that the pin assignment of the connector
matches with the JVC unit.
• Take extra notice of the power wire.
• In case battery wire and ignition wire are not
corresponding then change them accordingly.
• In case the car does not have an ignition wire, use a
commercially available interface.