11
English |
Tuner
Tuner
Tuner Basic Operation
1 Press the < > button.
2 Touch [Tuner].
Ñ Source control screen
4
1
3
2
5
1
Displays the information of the current station:
PS name, Frequency, PTY Genre, Indicator Items
[<<] [>>] : Touch to the next frequency manually.
2
Recalls the memorized station.
When touched for 2 seconds, stores the current
receiving station in memory.
3
[E] [F] : Tunes in a station with good
reception automatically. *
1
[TA]*
2
*
3
: Traffic information mode is set. (P.11)
[PTY]*
2
*
3
: Select the available Program Type.
(P.11)
*1 If “AF” is set to ON on the Tuner screen, only RDS
stations are received. (P.12)
*2 FM only
*3 Europe, CIS sales area only
4
[1] : Presets stations automatically
5
[FM] : Switches the FM band.
“FM1”, “FM2”, “FM3”
[AM] : Switches the AM band.
“AM1”, “AM2”
Presetting stations
Ñ Storing stations in the memory
You can preset 18 stations for FM and 12 stations for
AM.
1 Touch [FM] or [AM] to select the band.
2 Touch [1].
The local stations with the strongest signals are
found and stored automatically.
• If “AF” is set to “ON” on the Tuner screen, only RDS
stations are stored in the memory. (P.12)
Ñ Manual memory
You can store the current receiving station in
memory.
1 Tune in to a station you want to preset.
2 Touch and hold [#] (#:1-6) in which you want to
store the station.
Ñ Recalling the preset station
1 Touch [#] (#:1-6).
✎ NOTE
• Only frequncies are registered as preset stations.
Information about RDS stations is not registered.
FM RDS features
(Europe, CIS sales area only)
Ñ Search by program type
1 Touch [PTY].
2 Select a program type from the list.
PTY Search starts.
Ñ Trac Information
1 Touch [TA].
Switches to the traffic information automatically
when the traffic bulletin starts. (TA indicator lights
up.)
“ON”, “OFF” (Default)
•
If “AF” is set to “ON” on the Tuner screen, the station is
switched to the RDS station. (P.12)
When the trac bulletin starts
The Traffic Information screen appears automatically.
To Next Page
Loading...
