JVC KW-M24BT - Clock Settings; Touch Panel Adjustment

4
Getting Started
Clock settings
Ñ Synchronizing the clock time with FM RDS
Activate [RDS Clock Sync]. See “Tuner Setup”
(P.12).
Ñ Adjusting the clock manually
✎ NOTE
• Deactivate [RDS Clock Sync] before adjusting the
clock. See “Tuner Setup” (P.12).
1 Press the < > button.
2 Touch [Settings].
3 Touch [General].
4 Touch [Clock Setting].
Clock screen appears.
5 Selects time format.
[12] (Default : North America, South America sales
area only)
[24] (Default : Europe, CIS sales area only)
6 Touch [R] or [S] to set the clock time.
• If you have selected [12] as the time format, touch
[AM] or [PM] before setting the clock time.
7 Touch [6].
Touch panel adjustment
1 Press the < > button.
2 Touch [Settings].
3 Touch [Display].
4 Touch [Panel Adjust].
5 Follow the instruction on the screen and touch
the center of each +.
• To cancel the touch panel adjustment, touch
[Cancel].
• If the touch position is deviated, [OK] is not
displayed. Retry from the beginning.
6 Touch [OK].