JVC KW-NSX1 - Sound Adjustment Features; Using the Sound Equalization; Storing and Customizing Sound Adjustments

38
ENGLISH
Sound adjustment
Selecting a preset sound mode
1 On <AV Menu> screen:
or
On the source control screen:
2 Select a sound mode.
Changes the page
Storing your own adjustment
Customizing preset sound mode
1 Select a sound mode. (☞ “Selecting a preset
sound mode”)
2 Adjust the level of each band (1), then
select the subwoofer level (2).
The adjustments are stored and <User> is
activated.
• To finish the procedure, press [
].
• To make precise adjustments, ☞
page 39.
Using the sound equalization
• The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the
adjustment is stored for each of the following categories.
– DVD/DVD-VR/ VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV
• You cannot adjust the sound when the AV source is turned off.
EN_KW-NSX1[J].indb 38EN_KW-NSX1[J].indb 38 12/04/23 16:2312/04/23 16:23