JVC KW-V250BT - Page 22

q
[ ]
Displays the <Channel List> screen.
[
*]
Starts/pauses the content replay.
[CH
J]/[CHK]
Selects the channel.
• To select a channel, make sure
“SEEK1” is selected as the seek
mode.
• To select a preset channel, make
sure “SEEK2” is selected as the seek
mode.
Selecting a channel on the list
You can obtain information on channels or select a
channel to listen to.
1 Display the <Channel List> screen.
On the source control screen, touch as follows:
2 Select a category (1), and then select a
channel (
2).
All Channels
Category Name 1
Category Name 2
Category Name 3
Category Name 4
100Ch Channel Name
105Ch Channel Name
110Ch Channel Name
115Ch Channel Name
120Ch Channel Name
Channel Channel List
Operation keys on source control screen
• The following explanations state the operation keys
for KW-V250BT/KW-V25BT, unless stated otherwise.
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page8.
Touching the operation keys performs the following
actions:
1
[MODE] Displays the <SiriusXM Mode>
screen.
[
]
(Hold) Registers the current artist to
the alert contents.
[
]
(Hold) Registers the current song to
the alert contents.
[
]
Activates or deactivates the content
alert for traffic and weather.
[SEEK]
Changes the seek mode for [CH
J]/
[CHK].
• SEEK1 (Initial): Skips to another
available channel.
• SEEK2: Skips to another preset
channel.
[SCAN] Starts TuneScan™.
[
S]/[T]/
[Live]
Performs playback operations during
content replay.
[
]
Changes the page in the window to
display other operation keys.
SiriusXM® Satellite RadioSiriusXM® Satellite Radio
• To list all the channels, touch [All Channels].
• Touch the info change key above the list
([Channel]/[Artist]/[Song Title]/[Info]) to
display other information in the following order:
Channel, Artist, Song Title, Content Info.
Presetting channels in the memory
You can preset five channels for each band.
1 Tune in to a channel you want to preset.
2 Select a preset number to store into.
P1
P2
P3
P4
P5
SiriusXM
(Hold)
E.g. SiriusXM source control screen for KW-V250BT/
KW-V25BT
The channel selected in step 1 is stored into the
preset number [P1] to [P5] you have selected.
20
ENGLISH
00_KWV_2019ST_KR.indb 2000_KWV_2019ST_KR.indb 20 1/6/2018 8:19:14 AM1/6/2018 8:19:14 AM