JVC KW-V40BT - SETTINGS; Sound adjustment

Sound adjustment
0
Using
the
sound
equalization
•
The adjustment
is
memorized
for
each source until
you adjust
the
sound again.
If
the
source
is
a disc,
the adjustment
is
stored for each
of
the following
categories.
- DVD/DVD-VRNCD
-CD
- DivX/MPEG1/MPEG2/MP3/WMA/WAV
•
You cannot adjust
the
sound when the
AV
source
is
turned off.
Selecting a preset sound mode
1
Display
the
<Equalizer>
screen.
On
the
<HOME>
screen:
On
the
source control screen:
38
2
Select a sound mode.
• You
can
change the page
to
display more
items by pressing
[•]/[~].
Storing your own adjustment-Customizing
preset sound mode
1
Select a sound mode.
(See
the
left column.)
2
Adjust
the
level
of
each band
(G)),
then
select the subwoofer level
(@).
The adjustments are stored and
<User>
is
activated.
•
To finish the procedure,
press[~].
Storing your own
adjustment-Adjusting
the
sound precisely
1
Select a sound mode
(see
the left column),
then
...
2
Select a band.
3
Adjust the sound.
<Reset>
<Freq>
<Q>
<Bass>
<SWLevel>
Changes level
of
Low/Mid/
High
to
0.
Selects frequency.
Adjusts the
width
of
the
frequency.*
1
Activates/deactivates bass.*
2
Adjusts subwoofer
level.
The adjustments are overwritten
if
the
<User>
setting
has
been created
(see
the
left
column),
and
<User>
is
activated.
•
To finish
the
procedure,
press
[G].
•
The adjustments are memorized until you adjust
sound again.
•
To make adjustment for other bands, repeat steps
2
and
3.
*
1
Fixed
for
"High"
band.
*
2
Only
for
"Low"
band.