JVC KW-V640BT - Bluetooth Mobile Phone

26 ENGLISH
Bluetooth mobile phone
When a call comes in...
AM
10:00
Phone
Jan.Mon. 1
Touching the operation keys performs the following
actions:
[ ]
Answers a call.
[
]
Rejects a call.
[Speech
Quality]
Displays the <Speech Quality adjust>
screen.
• Microphone Level: Adjusts the
microphone volume level. (–10 to 10,
initial: 0)
• Echo Cancel Level: Adjusts the echo
volume level. (OFF, –5 to 5, Initial: 0)
• Noise Reduction Level: Adjusts the
noise reduction volume. (OFF, –5 to 5,
Initial: 0)
• Call information is displayed if acquired.
• Phone operation is not available while the picture
from the rear view camera is displayed.
Changing the device name of the unit
displayed on the paired device
1 Display the <Change Device Name>
screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [Device
Name].
2 Enter the device name (1), then confirm
the entry (
2).
• To clear the last entry, touch [BS].
• To move the entry position, touch [H]/[I].
Bluetooth®Bluetooth®
During a call...
AM
10:00
Phone
Jan.Mon. 1
Touching the operation keys performs the following
actions:
[ ]
Ends a call.
[
]
Mutes the volume of the microphone.
[
]/
[
]
Switches between hands free mode
and phone mode.
[DTMF] Enters DTMF (Dual Tone Multi
Frequency), then sends text using the
keypad.
[Speech
Quality]
Displays the <Speech Quality adjust>
screen.
• See the left column for details.
ENKW-V2018TCM.indb26ENKW-V2018TCM.indb26 2018/01/1615:052018/01/1615:05