EasyManua.ls Logo

JVC KW-V640BT - Page 33

JVC KW-V640BT
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31ENGLISH
Setting the speakers and crossover
frequency
1 Select a car type (1), select a speaker
(
2) (front speakers, rear speakers, or
subwoofer) to set, then location* and
speaker/tweeter size (
3) of the selected
speaker.
A selection window appears for each setting. Select
an item, then touch [Close] to close the window.
Comfort
4 inch
Car Type
Speaker
Door
Location
Medium
Tweeter
X’over
Speaker Select
• Repeat steps 2 and 3 to set all speakers.
Adjustable items vary depending on the selected
speaker type.
When a speaker is not connected, select [None].
When setting the front speakers, also select the
speaker size for <Tweeter>.
2 Touch [X’over] to display the <X’over>
screen.
3 Select the speaker type (1), then adjust
the crossover frequency (
2) of the
selected speaker.
X’over
100 Hz
HPF FREQ
-6 dB/Oct
Slope
0 dB
Gain
-1 dB
TW Gain
SubwooferRearFront
Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Gain>
Adjusts the output volume of the selected speaker.
<TW Gain>
Adjusts the output volume of the tweeter.
<Phase Inversion>
Selects the phase for the speaker.
* Speaker location selection is available only when <X’over
Network> is set to [2way].
<Equalizer>
The following adjustments are memorized for each
source until you adjust the sound again. If the source
is a disc, the adjustments are stored for each of the
following categories.
• DVD/VCD
• CD
Audio/video files (Page 44)
You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the preset sound modes.
2 Select a preset sound mode.
Pop/Hip Hop/R&B/Jazz/Classical/Hard Rock/
Flat (Initial)/iPod/User1/User2/User3/User4
Graphic Equalizer
ALL SRC
iPod
Flat
Pop
iPod
Hip Hop
User1
R&B
User2
Jazz
User3
Classical
User4
Hard Rock
To hide the preset sound modes: Touch [ ] .
SettingsSettings
ENKW-V2018TCM.indb31ENKW-V2018TCM.indb31 2018/01/1615:062018/01/1615:06

Other manuals for JVC KW-V640BT

Related product manuals