EasyManua.ls Logo

JVC KW-V640BT - Page 35

JVC KW-V640BT
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33ENGLISH
SettingsSettings
Localizing the sound image—Front Focus
1 Touch [Front Focus] (1), select the
listening position (
2) to set as the front
position, then touch [Adjust] (
3).
Front FocusListening Position
Front L
Front All
Priority L
All
Priority L
Front R
Front All
Priority R
All
Priority R
Adjust
Position/DTA
When you are sitting on the [Front All] (front
seats) or [All] (front and rear seats) position, select
left (“Priority L”) or right (“Priority R”) to specify
the position to localize the sound image.
2 Touch [Delay] (1), then adjust the sound
image (
2) precisely.
Initialise
Sound Image LR(Front)
Sound Image LR(Rear)
Size of the Virtual Sound Field
Subwoofer Delay
Level
Delay
Front Focus Adjust
0.00ms
0.00ms
0.00ms
0.00ms
0.00ms 0.00ms
[Sound Image LR (Front)]
Adjusts the sound image to be localized set on the
front position.
[Sound Image LR (Rear)]
Adjusts the sound image to be localized set on the
rear position.
[Size of the Virtual Sound Field]
Adjusts the virtual sound field to the desired field
size.
If the sound image moves out of the front
position, adjust [Sound Image LR (Front)]/
[Sound Image LR (Rear)].
[Subwoofer Delay]
Adjusts the delay time of the subwoofer sound.
3 Touch [Level] (1), then adjust the output
volume (
2) for each speaker.
0 dB
Tweeter
0 dB
Front L
0 dB
Rear L
0 dB
Front R
0 dB
Rear R
0 dB
Subwoofer
Initialise
Level
Delay
Front Focus Adjust
To initialize the setting value: Touch [Initialise].
Determining the value for <Position/DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance of
the furthest speaker and other speakers.
4 Set the DTA value calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers.
E.g. When [Front All] is selected as the listening
position
+90 cm
60 cm
80 cm
+70 cm
150 cm
+0 cm
ENKW-V2018TCM.indb33ENKW-V2018TCM.indb33 2018/01/1615:062018/01/1615:06

Other manuals for JVC KW-V640BT

Related product manuals