38 ENGLISH
<Audio SETUP Recall>*
Recall the settings memorized by <Audio SETUP
Memory>. A confirmation message appears. Touch
[Yes].
<Audio SETUP Clear>*
Clear the settings made on the <Audio> screen. A
confirmation message appears. Touch [Yes].
<Software Information>
Display the information of the software (such as serial
number, application version, system version, etc.). You
can update the software.
<Open Source Licenses>
Show the Open Source Licenses.
<Initialise>
Initialize all settings made on the unit. A confirmation
message appears. Touch [Yes].
• The settings memorized on the <Audio SETUP
Memory> are not initialized.
* Available only when <SETUP Memory> is set to [Unlock].
SettingsSettings
Bluetooth settings
Display the <Bluetooth> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
<Bluetooth>
• ON (Initial): Activates the Bluetooth function of the
unit.
• OFF: Deactivates the Bluetooth function of the unit.
<Select Device>
Connect or disconnect the paired device. (Page 25)
<Device Name>
Display/change the device name to be shown on the
Bluetooth device. (Page 26)
<PIN Code>
Change the PIN code of the unit. (Page 25)
<Device Address>
Display the device address of the unit.
<TEL SETUP>
Configure the setting for using a Bluetooth mobile
phone. (Page 29)
<MIC SETUP>
(Only for KW-V640BT Region 3/KW-M540BT
Southeast Asian models)
Select the microphone to use for Bluetooth mobile
phone.
• Built-in Mic (Initial): Select this when using built-in
microphone.
• External Mic: Select this when using the external
microphone connected to the MIC terminal.
Security settings
Display the <Security> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Security].
<Security Code Set>
Register the security code for the unit. (Page 4)
<Security Code Cancellation>
Clear the security code. (Page 5)
<Security Code Change>
Change the security code. (Page 5)
ENKW-V2018TCM.indb38ENKW-V2018TCM.indb38 2018/01/1615:062018/01/1615:06
To Next Page
Loading...
