EasyManua.ls Logo

JVC KW-V640BT - Page 36

JVC KW-V640BT
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34 ENGLISH
For a Bluetooth device compatible with
Bluetooth 2.0:
Select the unit (“KW-V6”) on your Bluetooth device.
If a PIN code is required, enter the PIN code
shown on the screen (initial: “0000”).
To change PIN code, see page 35.
2 Determine usage as a hands free device
(
1), then touch [Close] (2).
[Hands Free1]/
[Hands Free2]
Select hands free number to
use as the hands free device.
[No Connection.] Select this when you do not
want to use as the hands free
device.
3 When your Bluetooth device is compatible
with A2DP or SPP: Determine usage as
an audio player or a device with Apps
installed.
[Yes] Select to use the device as an audio player.
[No] Select this when you do not want to use
the Bluetooth device as an audio player.
Bluetooth®Bluetooth®
4
When your Bluetooth device is compatible
with PBAP: Select whether to transfer the
phonebook of your Bluetooth device to
the unit or not.
[Yes] Select to transfer the phonebook from
your Bluetooth device.
[No] Select this when you do not want to
transfer the phonebook.
Connecting/disconnecting a registered
Bluetooth device
1 Display the <Select Device> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [Select
Device].
2 Select the device you want to connect/
disconnect.
The icons beside the registered device indicate the
following:
/
: Connected as a mobile phone.
: Connected as an audio player.
3 Select the usage of the device (1), then
touch [Close] (
2).
Each time you touch the selection, the usage is
selected (“ ” appears) or deselected (“
disappears). Select to connect and deselect to
disconnect the device.
[TEL (HFP)1]/
[TEL (HFP)2]
Select to use as the hands free
device.
[Audio (A2DP)/
App (SPP)]
Select to use as the audio
player or device with Apps
installed.
To delete the registered Bluetooth device: Touch
[Delete] in step 2, select devices to delete, then touch
[Delete]. A confirmation message appears. Touch
[Yes].
To select all devices, touch [
All].
To deselect all selected devices, touch [ All].
ENKW-V2018TCKR.indb34ENKW-V2018TCKR.indb34 2017/12/049:412017/12/049:41

Other manuals for JVC KW-V640BT

Related product manuals