JVC KW-V640BT - Installing the Unit; Removing the Unit

52 ENGLISH
Installation and ConnectionInstallation and Connection
Installing the trim plate
(Only for KW-V640BT Region 4)
Remove the separator of the trim plate (‘),
then attach the trim plate (
‘) to the unit.
‘
Installing the unit
Installing the unit using the mounting
bracket removed from the car
Car bracket
π / [
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
Installing the unit using the mounting
sleeve
(Only for KW-V640BT Region 4)
]
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
Removing the unit
(Only for KW-V640BT Region 4)
1 Remove the trim plate (‘).
‘
2 Remove the unit by inserting the two
extraction keys (
\), then pulling them as
illustrated.
\
Be careful to avoid injury from the catch pins on
the extraction key.
ENKW-V2018TCKR.indb52ENKW-V2018TCKR.indb52 2017/12/049:412017/12/049:41