JVC KW-V820BTM - Page 34

34
BLUETOOTH
❏ Changing the PIN code
1 Display the <Bluetooth Setup> screen.
(Page33)
2 Display the PIN code input screen.
3 Enter the PIN code (1), then confirm the
entry (2).
• Touch [ ] to delete the last entry.
❏ Change the device name of the unit
displayed on the paired device
1 Display the <Bluetooth Setup> screen.
(Page33)
2 Display the device name entry screen.
3 Enter the device name (1), then confirm
the entry (2).
• Touch [ ] to delete the last entry.
• Touch [H]/[I] to move the entry position.
Using a Bluetooth mobile phone
❏ Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• The call incoming screen is not displayed while
the camera screen is displayed. To display the
call incoming screen, shift the gear to the drive
position.
To reject a call
When <Auto Response> is activated (Page40)
The unit answers incoming calls automatically.