JVC KW-V820BTM - Page 36

36
BLUETOOTH
❏ Switching between two connected
devices
When two devices are connected, you can change
the device to use.
While using a Bluetooth mobile phone, select the
device you want to use.
1 Display the phone control screen.
On the Home screen:
• You can also display the phone control screen
by selecting [
] on the pop-up short-cut
menu. (Page11)
2 Select the device to use.
The active device is highlighted.
❏ Muting the volume of the microphone
While talking...
To restore the volume, touch [ ].
❏ Sending dial tone during a call
You can send dial tone during a call using the DTMF
(Dual Tone Multi Frequency) function.
1 Display the tone input window.
While talking...
2 Input the tone to send.
• To close the window, touch [Close].
❏ Making a call
1 Display the phone control screen.
On the Home screen:
• You can also display the phone control screen
by selecting [
] on the pop-up short-cut
menu. (Page11)
2 Select a method to make a call.
[ ]
From the call history*
[
]
From the phone book*
[
]
From the preset list
• To preset, see page38.
[ ]
Direct number entry
[
]
Voice dialing
• You can display the <Bluetooth Setup>
screen by touching [
].
* When the mobile phone is not compatible with Phone Book Access
Profile (PBAP), the phone book is not displayed.