JVC KW-V850BTM - Page 8

Basic Operations
8
■ [Camera]
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
].
For details, see Camera Setup (P.38).
■ [DEMO]
Set the demonstration mode. Default is “ON”.
1 Touch [DEMO] to turn ON or OFF.
■ [3way X'over]
Displays the message screen.
For details, see 3-way speaker system setup
(P.58).
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.52).
Security Code Setup
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be deactivated. Note that the Security
Code can be set with a 4 to 8 digit number of
your choice.
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
4
Touch [Security].
 Security screen appears.
5
Touch [Security Code Set] on the Security
screen.
 Security Code Set screen appears.
6
Enter a security code with 4 to 8 digits
and touch [Enter].