JVC KW-V960BW - Page 57

Other External Components
57English
■ [Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
■ [Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.58).
■ [Front Camera Interruption]*
2
[10 sec]/[15 sec] (Default)/[20 sec]: The front
camera screen is displayed when return
the gear from the reverse (R) position.
[OFF]: Cancel.
*
1
To use the function, it is necessary to set
[Rear Camera Interruption] to [ON].
*
2
To use the function, it is necessary to set
[Rear Camera Interruption] to [ON] and
to assign front position to the view camera
in [Camera Assignment Settings].
(P.57)
Ñ To set up the camera
assignment settings
1
Touch [Camera Assignment Settings] on
the Camera screen. (P.56)
2
Select the item to set up.
■ [FRONT VIEW CAMERA]
Set the camera assignment from view
camera connected to Front view camera
input terminal.
■ [3rd VIEW CAMERA]
Set the camera assignment from view
camera connected to 3rd view camera
input terminal.
■ AV-IN
Set the camera assignment from view
camera connected to AV-IN input terminal.
3
Select the view camera to set up.
42 5
1 3
1
[Picture from view camera]
Displays the picture from the view camera
connected to the input terminal to be set.
(P.97)
2
[Front]
Assign front position to the view camera
connected to the selected input terminal.
3
[Right]
Assign right position to the view camera
connected to the selected input terminal.
4
[Left]
Assign left position to the view camera
connected to the selected input terminal.
5
[None]
Assign no position to the view camera
connected to the selected input terminal.
4
Touch [Enter].
NOTE
• The screen shot above is for the [FRONT VIEW
CAMERA] setting screen. It may be different from
the ones for [3rd VIEW CAMERA] and [AV-IN].