JVC LT-32DH8ZG - Page 63

English-60
5 Select Save and press the OK button to complete.
6 Select Cancel and press the OK button to cancel the reservation.
Notes:
1. The recoding schedule can not be overlapped with up to two other
programmes.
2. You can set the Power On/Off Time overlapping the recording schedule.
3. If you have set
Lock to Enable on the reservation, you have to enter your
password to playback the recorded programme.
Editing a Reservation
1 Select the scheduled programme and press the OK button to edit the
reservation information.
2 Change Channel No. and Time using the NUMBER(0-9) buttons.
3 Change Repeat mode using the ◄/► button. The options are Once ( ),
Daily ( ) and Weekly ( ).
4 Change Lock mode using the ◄/► button.
5 Select Save and press the OK button to complete.
6 Select Cancel and press the OK button to cancel the editing.
7 Select Delete and press the OK button to delete the reserved programme.
Note: If you have set Lock to Enable on the reservation, you have to enter your
password to playback the recorded programme.
By the reserved time, the recording will be started with a conrm message.
Notes:
1. You can record the digital TV or radio programmes only. The analog channels
and external A/V inputs can’t be recorded.
2. During recording, you can’t change channels or playback the recorded
programme.
3. During recording, the standby indicator on the front of your TV is blinking in
amber.
4. During recording or playing the recorded programmes, you can access only to
the Picture, Sound and a part of Feature in menus.
5. While TSR(Time Shifted Recording), you cannot perform the instant recording
or the scheduled recording.
6. Ensure that there is enough free space before recording, because if the free
space on the hard disk drive is insufcient, recording will stop. Recording 1
hour of programme may require up to 3GB of free space of hard disk space.
The space for recording 1 hour of programme may be different depending on
the programme recorded.
7. If you press the STANDBY button during recording, the conrm message will
appear.
Chapter 11 >> Recording