EasyManua.ls Logo

JVC LVT0142-006A - Specifications

JVC LVT0142-006A
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
English
Specifications
Amplifier
Output Power
At Stereo operation: 100* watts per channel, min. RMS, driven into
8 ohms, at 1 kHz with no more than 0.9 %
total harmonic distortion. (IEC268-3/DIN)
At Surround operation:
Front Channels: 80* watts per channel, min. RMS, driven into
4 ohms at 1 kHz with no more than 0.8 % total
harmonic distortion.
Center channel: 80* watts, min. RMS, driven into 4 ohms at 1
kHz, with no more than 0.8 % total harmonic
distortion.
Rear channels: 80* watts per channel, min. RMS, driven into
4 ohms at 1 kHz, with no more than 0.8 %
total harmonic distortion.
(* Measured on AC 110V, 127V, 220V, and
240V)
Total Harmonic Distortion (8 ohms, 1 kHz):
0.8%** at 100 watts output
(** Measured by JVC Audio Analysis
System, on AC 110V, 127V, 220V, and
240V)
Audio
Audio Input Sensitivity/Impedance (1 kHz):
PHONO (MM): 2.7 mV/47 k ohms
CD, TAPE/MD, TV SOUND, VCR, DVD:
220 mV/47 k ohms
Audio Output Level: TAPE/MD, VCR 220 mV
Signal-to-Noise Ratio (’66 IHF/DIN):
PHONO: 70 dB/66 dB
CD, TAPE/MD, TV SOUND, VCR, DVD:
87 dB/67 dB
Frequency Response (8 ohms)
PHONO: 20 Hz to 20 kHz (±1 dB)
CD, TAPE/MD, TV SOUND, VCR, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization: ±1 dB (20 Hz to 20 kHz)
Video
Video Input Sensitivity/Impedance:
Composite video: VCR, DVD:
1 Vp-p/75 ohms
S-video: DVD (Y: luminance): 1 Vp-p/75 ohms
(C: chrominance, burst): 0.286 Vp-p/75 ohms
Video Output Level:
Composite video: VCR, MONITOR OUT
1 Vp-p/75 ohms
S-video: MONITOR OUT
(Y: luminance): 1 Vp-p/75 ohms
(C: chrominance, burst): 0.286 Vp-p/75 ohms
Synchronization: Negative
Signal-to-Noise Ratio: 45 dB
On-Screen Color System: PAL
FM tuner (IHF)
Tuning Range: 87.50 MHz to 108.00 MHz
Usable Sensitivity: Monaural: 17.0 dBf (1.95 µV/75 ohms)
50 dB Quieting Sensitivity
Monaural 21.3 dBf (3.2 µV/75 ohms)
Stereo 41.3 dBf (31.5 µV/75 ohms)
Signal-to-Noise Ratio (IHF-A weighted)
Monaural 78 dB at 85 dBf
Stereo 73 dB at 85 dBf
Total Harmonic Distortion:
Monaural 0.4 % at 1 kHz
Stereo 0.6 % at 1 kHz
Stereo Separation at REC OUT: 35 dB at 1 kHz
Alternate Channel Selectivity:
60 dB: (±400 kHz)
Frequency Response:30 Hz to 15 kHz: (+0.5 dB, –3 dB)
AM tuner
Tuning Range: 531 kHz to 1,602 kHz (at 9 kHz interval)
530 kHz to 1,600 kHz (at 10 kHz interval)
Usable Sensitivity: Loop antenna 400 µV/m
Signal-to-Noise Ratio 50 dB (100 mV/m)
General
Power Requirements: AC 110V/127V/220V/230-240V ,
Adjustable with the voltage selector, 50/
60 Hz
Power Consumption: 250 watts (at operation)
5 watts (in standby mode)
Dimensions (W x H x D): 435 x 146 x 403.5 mm
(17
3
/16 x 5
3
/4 x 15
15
/16 inches)
Mass: 10.2 kg (22.5 lbs)
Designs & specifications are subject to change without notice.
EN21_34.RX-669PGD[UB]/f 99.2.2, 1:40 PM34

Table of Contents

Related product manuals