To Next PageTo Next Page
Need help?Do you have a question about the JVC MX-GT98V and is the answer not in the manual?
General| Type | Micro Music System |
|---|---|
| CD Player | Yes |
| Radio Tuner | Yes |
| Power Output | 100W |
| Bluetooth | No |
| USB Port | No |
| Amplifier Output | 100W |
| Number of Discs | 1 |
| Remote Control | Yes |
| Speakers | 2 |
| Functions | CD, Radio |
| Cassette Deck | Yes |
Procedure for disassembling the main body of the unit.
Step-by-step guide to remove the CD changer mechanism assembly.
Procedure for removing the fan component.
Steps to remove the front panel assembly from the unit.
Procedure for removing the tuner board.
Steps to remove the rear cover and rear panel.
Procedure for removing the main electronic board.
Steps to remove the speaker board.
Procedure for removing the power supply board.
Steps to remove amplifier board, voltage board, and heat sink.
Procedure for removing the power transformer assembly.
Steps to remove the regulator board.
Procedure for removing the power cord from the unit.
Procedure for removing the cassette mechanism.
Steps to remove the display system control board.
Procedure for removing the CD eject board.
Steps to remove the preset/tuning switch board.
Procedure for removing the operation switch board.
Steps to remove the CD servo control board.
Procedure for removing the CD tray assembly.
Steps to remove the CD loading mechanism assembly.
Procedure for removing the CD traverse mechanism.
Steps to remove the CD pick-up unit.
Steps to remove the tray select switch board.
Procedure for removing the cam unit.
Steps to remove the actuator motor and belt.
Procedure for removing cams and cam gear.
Steps to remove the C.G. base assembly.
Steps to remove the front panel of the speaker.
Procedure for removing the tweeter speaker component.
Steps to remove the sub panel of the speaker.
Procedure for removing the squawker speaker component.
Steps to remove the woofer speaker component.
Procedure for removing the duct from the speaker.
Steps to remove the front panel of the speaker for specific models.
Procedure for removing the tweeter speaker for specific models.
Procedure for removing the squawker speaker for specific models.
Steps to remove the woofer speaker for specific models.
Steps to remove the sub panel for specific speaker models.
Procedure for removing the duct from the speaker for specific models.
Steps to remove the side cover of the speaker for specific models.
Procedure for removing the squawker speaker for specific models.
Steps to remove the front cover of the speaker for specific models.
Steps to remove the woofer speaker for specific models.
Procedure for removing the tweeter speaker for specific models.
Steps to remove the CD servo control board.
Procedure for removing the CD tray assembly.
Steps to remove the CD loading mechanism assembly.
Procedure for removing the CD traverse mechanism.
Steps to remove the CD pick-up unit.
Steps to remove the tray select switch board.
Procedure for removing the cam unit.
Steps to remove the actuator motor and belt.
Procedure for removing cams and cam gear.
Steps to remove the C.G. base assembly.
Procedure for removing playback, recording, and eraser heads.
Steps for reassembling playback, recording, and eraser heads.
Procedure for removing the head amp and mechanism control board.
Steps to remove the capstan motor assembly and belts.
Procedure for removing the capstan motor.
Steps to remove the flywheels.
Procedure for removing the reel pulse board and solenoid.
List of instruments needed for performing adjustments.
Conditions required for measurement and adjustment.
Important precautions to observe during measurement.
Diagram showing locations of adjustment points.
Adjustments specific to the tape recorder section.
Reference values for confirming adjustments.
Procedure for adjusting the recording bias current.
Adjusting frequency characteristics for recording and playback.
Reference values for confirming electrical functions.
Procedure for cleaning the laser pickup lens.
Symptoms indicating the end of the laser diode's life.
Information on the APC PC board semi-fixed resistor for laser power.
Block diagram and pin function description for the PB/REC amplifier.
Pin function details for the system controller IC.
Pin layout, block diagram, and pin function for the port extender.
Block diagram and pin function for the digital servo head amplifier.
Block diagram and pin function for the microphone mixer.
Description of operational amplifier ICs.
Pin layout and block diagram for LPF & Echo mix IC.
Block diagram and pin function for FM/AM IF amplifier and decoder.
Pin layout and block diagram for the servo driver IC.
Pin layout, block diagram, and pin function for PLL synthesizer.
Pin layout and block diagram for STK402 series power amplifiers.
Schematic diagram for STK412 series power amplifiers.
Pin layout and block diagram for the control volume IC.
Block diagrams and pin function for the SPI B.P.F. IC.
Terminal layout and pin function for the port expander IC.
Diagram for the R/P switch IC.
Pin layout and pin function for DC motor drivers.
Pinout for the US version microphone amplifier IC.
